Web Analytics July 2020 - Update - Beautiful Views
Welcome to Beautiful Views!

We manufacture a unique window plant shelf that offers a functional and space saving solution for those that love to grow and enjoy plants inside their home.

Our small family business follows three simple principles: Treat everyone as we would like to be treated - Build our products in America -

Use American made materials in our products and business whenever possible.

Jim and Charmaine Baggett

All units feature easy to adjust shelves!

The minimalist styling of our shelves create a simplified elegance within your window
allowing your plants to receive plenty of light without blocking your view.

Reclaim your counter and table space! Our unique space saving solution
is the perfect solution for apartments or those with limited space.

  Window Plant Shelves - 20" Standard Size

FREE SHIPPING - Within the contiguous U.S.

 

MADE IN THE USA!

Sold out

Sold out

Sold out
  • Space saving window plant shelves, perfect for apartments and those with limited space.
  • Fully assembled and ready to hang. Adjustable shelves easily fit a wide range of plant heights.
  • Supported by a single bracket and fastener resting on top of the window trim.
  • Mounting blocks and hardware included for windows that do not have window trim.
  • 6" deep and up to 54" long - 3/64" cable and shelf supports provide a clean uncluttered look.
  • Currently we are only building the 20" Standard Units and do not have a timeline for when we will be able to offer the wider "Custom Units"

Check out some of our customer windows!

 

  • Currently we are only able to build the 20" Standard Units and do not have a timeline for when we will again be able to offer the wider "Custom Units"

 

 

  • Contact us before purchasing if your window has blinds and we can help you determine the best way to mount your shelves.

 

 

  • Contact us before purchasing if your window is very deep and you want to hang your shelves from hooks.

 

 

STANDARD MOUNT

 

By far the easiest and most popular way to install

your new window plant shelves!

 

  • Place the angle bracket on the top of the window trim and align the shelves to your desired location.
  • Drive a finishing nail into the center hole on top of the angle bracket. Leave about 1/4" to 1/2" of the nail above the angle bracket.
  • Done!

 

IMPORTANT - There must be enough room between the top of your molding and the ceiling to use a hammer to drive in the finishing nail.

 


Welcome to Beautiful Views!

We manufacture a unique window plant shelf that offers a functional and space saving

solution for those that love to grow and enjoy plants inside their home.

 

Our small family business follows three simple principles: Treat everyone as we would

like to be treated - Build our products in America - Use American made

materials in our products and business whenever possible.

Jim and Charmaine Baggett

All units feature easy to adjust shelves!

The minimalist styling of our shelves create a simplified elegance within your window
allowing your plants to receive plenty of light without blocking your view.

Reclaim your counter and table space! Our unique space saving solution
is the perfect solution for apartments or those with limited space.


  Window Plant Shelves - 20" Standard Size

Sold out

Sold out

Sold out
  • Perfect for apartments and those with limited space.
  • Fully assembled and ready to hang.
  • Adjustable shelves that easily fit a wide range of plant heights.
  • Supported by a single bracket and fastener resting on top of the window trim.
  • Mounting blocks and hardware included for windows that do not have window trim.
  • 6" deep and up to 54" long - 3/64" cable and shelf supports provide a clean uncluttered look.
  • Currently we are only building the 20" Standard Units and do not have a timeline for when we will be able to offer the wider "Custom Units"

FREE SHIPPING - Within the contiguous U.S.

 

MADE IN THE USA!


Welcome to Beautiful Views!

We manufacture a unique window plant shelf that offers a

functional and space saving solution for those that

love to grow and enjoy plants inside their home.

Jim and Charmaine Baggett

All units feature easy to adjust shelves!

Our unique space saving solution is the perfect solution for apartments or those with limited space.

Made in the U.S.A. - FREE SHIPPING Contiguous U.S. Only.

Sold out

Sold out

Sold out
  • Perfect for apartments and those with limited space.
  • Fully assembled and ready to hang.
  • Adjustable shelves that easily fit a wide range of plant heights.
  • Supported by a single bracket and fastener resting on top of the window trim.
  • Mounting blocks and hardware included for windows that do not have window trim.

Check out some of our customer windows!


Check out some of our customer windows!


 

STANDARD MOUNT

By far the easiest and most popular

way to install your new window

plant shelves!

 

  • Place the angle bracket on the top of the window trim and align the shelves to your desired location.
  • Drive a finishing nail into the center hole on top of the angle bracket. Leave about 1/4" to 1/2" of the nail above the angle bracket.
  • Done!

 

IMPORTANT - There must be enough room between the top of your molding and the ceiling to use a hammer to drive in the finishing nail.


STANDARD MOUNT

 

By far the easiest and most popular way to install your new window plant shelves!

  • Place the angle bracket on the top of the window trim and align the shelves to your desired location.
  • Drive a finishing nail into the center hole on top of the angle bracket. Leave about 1/4" to 1/2" of the nail above the angle bracket.
  • Done!

IMPORTANT - There must be enough room between the top of your molding and the ceiling to use a hammer to drive in the finishing nail.


Hanging From Hooks

Hanging From Hooks

 

  • Utility hooks should only be used when you know solid wood is available for the hook to screw into.
  • You should use at least a # 8 hook with 1" of screw shaft.
  • You will need at least 3" of clearance down the entire window length from the hook install point to ensure the lower shelves are obstruction free.
  • Blinds and shades will most likely not work with hook mount installs unless the windows are very deep.

 

  • Utility hooks should only be used when you know solid wood is available for the hook to screw into.
  • You should use at least a # 8 hook with 1" of screw shaft.
  • You will need at least 3" of clearance down the entire window length from the hook install point to ensure the lower shelves are obstruction free.
  • Blinds and shades will most likely not work with hook mount installs unless the windows are very deep.

 

Hooks are not supplied with the shelves, customer is responsible for acquiring the proper hooks to work with the materials in their window!

 

IMPORTANT: If you want to install your shelves from hooks please add the following to the "ORDER NOTES"in the cart - Please set up shelves to hang from hooks!




 

Adjustable Extension Mounts

  • Extension mounts are available in two sizes: 2.5" (shown in photo) and 4.5"
  • The 2.5" mounts are perfect for those windows that are on the shallow side (less than 2"of free space) and for windows without trim. They also work with blinds if you just need to push the shelves out a couple of extra inches.
  • The 4.5" mounts are useful for those situations where blinds may fill most of the window and you need to make sure the shelves are far enough from the blinds to hang freely.
  • Extension mounts can be installed on the wall or on the trim itself if the trim is flat.
  • If installing on the trim face the extension mounts require a flat area 2.75" tall.
  • Extension mounts are intended to be installed directly to the header above the window with screws. Drywall anchors are not recommended.

     

     

    Send a photo of your window to "questions@beautifulviews.net" and we look over everything and make a recommendation about what will work best for your window.

 

Hanging From Hooks

 

  • Utility hooks should only be used when you know solid wood is available for the hook to screw into.
  • You should use at least a # 8 hook with 1" of screw shaft.
  • You will need at least 3" of clearance down the entire window length from the hook install point to ensure the lower shelves are obstruction free.
  • Blinds and shades will most likely not work with hook mount installs unless the windows are very deep.

 

  • Utility hooks should only be used when you know solid wood is available for the hook to screw into.
  • You should use at least a # 8 hook with 1" of screw shaft.
  • You will need at least 3" of clearance down the entire window length from the hook install point to ensure the lower shelves are obstruction free.
  • Blinds and shades will most likely not work with hook mount installs unless the windows are very deep.

 

 

 

Adjustable Extension Mounts

  • Extension mounts are available in two sizes: 2.5" (shown in photo) and 4.5"
  • The 2.5" mounts are perfect for those windows that are on the shallow side (less than 2"of free space) and for windows without trim. They also work with blinds if you just need to push the shelves out a couple of extra inches.
  • The 4.5" mounts are useful for those situations where blinds may fill most of the window and you need to make sure the shelves are far enough from the blinds to hang freely.
  • Extension mounts can be installed on the wall or on the trim itself if the trim is flat.
  • If installing on the trim face the extension mounts require a flat area 2.75" tall.
  • Extension mounts are intended to be installed directly to the header above the window with screws. Drywall anchors are not recommended.

 

Send a photo of your window to "questions@beautifulviews.net"

and we look over everything and make a recommendation

about what will work best for your window.


IMPORTANT: If you want to install your shelves from hooks please add the following to the "ORDER NOTES"in the cart - Please set up shelves to hang from hooks!

Hooks are not supplied with the shelves, customer is responsible for acquiring the proper hooks to work with the materials in their window!


 

 

 

Adjustable Extension Mounts

  • Extension mounts are available in two sizes: 2.5" (shown in photo) and 4.5"
  • The 2.5" mounts are perfect for those windows that are on the shallow side (less than 2"of free space) and for windows without trim. They also work with blinds if you just need to push the shelves out a couple of extra inches.
  • The 4.5" mounts are useful for those situations where blinds may fill most of the window and you need to make sure the shelves are far enough from the blinds to hang freely.
  • Extension mounts can be installed on the wall or on the trim itself if the trim is flat.
  • If installing on the trim face the extension mounts require a flat area 2.75" tall.
  • Extension mounts are intended to be installed directly to the header above the window with screws. Drywall anchors are not recommended.

 

Send a photo of your window to "questions@beautifulviews.net"

and we look over everything and make a recommendation

about what will work best for your window.

Adjustable Extension Mounts

  • Extension mounts are available in two sizes: 2.5" (shown in photo) and 4.5"
  • The 2.5" mounts are perfect for those windows that are on the shallow side (less than 2"of free space) and for windows without trim. They also work with blinds if you just need to push the shelves out a couple of extra inches.
  • The 4.5" mounts are useful for those situations where blinds may fill most of the window and you need to make sure the shelves are far enough from the blinds to hang freely.
  • Extension mounts can be installed on the wall or on the trim itself if the trim is flat.
  • If installing on the trim face the extension mounts require a flat area 2.75" tall.
  • Extension mounts are intended to be installed directly to the header above the window with screws. Drywall anchors are not recommended.

 

Send a photo of your window to "questions@beautifulviews.net" and we look over everything and make a recommendation about what will work best for your window.

 

 

 

 

If installing on the

trim face, the extension

mounts require a flat

area at least 2.75" tall.

 

 

If installing on the

trim face, the extension

mounts require a flat

area at least 2.75" tall.